Carbon Ceramic Brake Disc for MV Agusta F3 — Front

Starts from$600 USDper one rotor

1× Carbon Ceramic Rotor + Aluminum Hub
Brake pads quoted separately.

US UK EU Canada
Customs duties included in shipping.
DDP (duties and taxes prepaid) is available for selected destinations only. Some EU countries are excluded. Where DDP is unavailable, import duties and taxes are payable on arrival.
Secure Payment
PayPal VISA MasterCard Wire transfer eBay
Worldwide shipping
DHL FedEx UPS
1 7–10 days Assembled and packed — rotors are in stock, aluminum hats are machined for your motorcycle.
2 Shipped — choose your transit
Express Courier Fastest UK, US, Canada — Fast Track Customs Clearance. 5–7 days
Air Freight Standard Door to door worldwide, fully tracked. 10–14 days
Sea Freight Economy Best rate on multi-kit and oversized orders. 30–35 days
  • Manufacturer WarrantyMinimum 6-month coverage
  • Aftersales Service Available after every purchase
  • Brake fitment guarantee We confirm caliper, rotor and hat fitment using your VIN, vehicle model, year and photos of your current brake setup.

Tell us your model year, disc size and how many rotors you need.

We reply within 12 hours on average.

Carbon-ceramic discs for MV Agusta F3

Switch from steel to carbon-ceramic motorcycle brake discs for less weight at the wheels and more consistent braking under heat.

  • Easier changes of direction. Lighter discs reduce rotating mass, helping the bike feel more agile through corners.
  • More responsive suspension. Less weight at the wheels helps the suspension follow uneven road surfaces.
  • Consistent braking on demanding rides. High heat resistance helps limit brake fade during repeated hard braking, with matched carbon-ceramic pads.

Factory brakes & fitment

MV Agusta F3

Factory and carbon-ceramic disc specifications for F3
DiscDisc sizeApplication
Factory steel discØ320 mmF3 R manufacturer brochure; confirm F3 variant
Our carbon-ceramic disc — front320 × 6 mmConfirm model year

We confirm model year, diameter, thickness, bolt pattern, mounting-hole count, offset, wheel and caliper clearance before production. The factory caliper, wheel and hub can be retained only after fitment is confirmed. Aftermarket wheels and modified brakes require a separate check.

Motorcycle rotor specifications

Carbon-ceramic friction ring material properties.

Material properties of the motorcycle carbon-ceramic friction ring
PropertyMotorcycle rotor
Chemical compositionC, Si, SiC
Density≥ 2.0 g/cm3
Flexural strength≥ 120 MPa
Tensile strength≥ 60 MPa
Compressive strength≥ 200 MPa
Interlaminar shear strength≥ 12 MPa
In-plane shear strength≥ 50 MPa
Impact toughness≥ 20 kJ/m2
Coefficient of friction0.45–0.65
Thermal conductivity (perpendicular to layup)≥ 15 W/(m·K)
01

Shipping & Payment

Shipping — quoted by destination
Express DHL / UPS / FedEx
To your local international airport
Special line by air / sea
To Europe & the UK by train

Shipping is not included in the rotor price.

Payment methods
Visa / Mastercard
PayPal with credit card (+4.4%)
Payoneer
Cryptocurrency
02

Pricing & what’s included

Starts from $600 USD per one rotor. Order exactly the number of discs you need. Final pricing depends on dimensions and the confirmed build.

1×
Carbon ceramic rotor
Made to your confirmed diameter and thickness
1×
CNC-machined aluminum hub / carrier
7075-T6 aluminum, matched to your mounting and offset
Ti
Floating screws & bobbins
Floating hardware matched to your confirmed disc assembly
Brake pads quoted separately

Use a pad compound approved for the selected carbon ceramic disc. Pads intended for steel discs are not interchangeable by default.

Custom finishes, adapters, calipers and complete big brake kit (BBK) conversions can be quoted separately. Shipping is quoted by destination.

A direct replacement for the steel disc

For an original-size replacement, we match the carbon-ceramic disc and carrier to the confirmed diameter, mounting and offset of your steel disc. The factory wheel, hub and caliper can be retained once clearance and fitment are confirmed. Larger-disc conversions may require a spacer or caliper adapter.

  • Any motorcycle. Send us the model and year, and we confirm the disc dimensions with you.
  • One disc or a pair. Order a single disc for a bike with one front disc, or to replace one side only.
  • Our own pads. We supply brake pads with a compound made for carbon-ceramic. Pads made for steel discs are not compatible and can wear the friction surface.
  • Custom styling. We choose the disc shape with you, and the look can be customised.
Hand holding a floating carbon-ceramic motorcycle brake disc with a blue aluminium carrier and silver floating buttons
A floating disc: carbon-ceramic ring on an aluminium carrier.
Close-up of a carbon-ceramic friction ring held in the hand, showing the fine crackle pattern of the coated braking surface
The friction ring and its coated braking surface.

CCB or CCM

Disc thickness decides which material we use. CCB has a silicon carbide coating on its braking faces. The coating needs enough disc thickness beneath it to bond strongly.

Disc thicknessMaterialUsed for
6.0 mm and aboveCCBCoated braking faces
Less than 6.0 mmCCMThin discs, where a coating would not bond strongly enough
Carbon-ceramic friction ring held edge-on between finger and thumb to show its thickness
The ring seen edge-on.

Disc construction

A motorcycle disc is a floating assembly. The carbon‑ceramic ring is not bolted solidly to its carrier: bobbins hold it with a small amount of play, so the ring can grow as it heats and centre itself between the pads instead of pulling the carrier out of true.

  • Friction ring: long‑fibre carbon‑ceramic (C/SiC). CCB uses a silicon carbide coated braking surface; thinner CCM discs use an uncoated surface.
  • Centre bell (hat) and carrier: 7075‑T6 aluminium alloy, machined to your hub, bolt circle and offset.
  • Bobbins: Grade 5 titanium, Ti‑6Al‑4V. The bobbins are what joins the ring to the bell, and they set how much the ring can float; circlips retain them.
  • Bolts and hardware: Grade 5 titanium, Ti‑6Al‑4V.
Ten machined alloy brake disc bobbins, shown from the flange side and the shoulder side, with a pile of retaining circlips below them
Titanium bobbins and their circlips: they join the ring to the bell and set how much it can float.
Five Grade 5 titanium rotor bolts with flanged hex heads finished in burnt blue and violet
Grade 5 Ti‑6Al‑4V rotor bolts.

The 7075-T6 aluminium carrier transfers braking load to the hub. Grade 5 Ti-6Al-4V bobbins connect the friction ring to the carrier while allowing controlled floating movement. The bolts use the same titanium grade.

Titanium and aluminium are a galvanic pair. Keep the bolts at their specified torque, and check at each pad change that the bobbins still move freely.

Sizes

Outer diameter from 220 to 350 mm. Every diameter is available 5.5 or 6.0 mm thick, and from 320 mm up we also make the ring 6.75 or 8.0 mm thick.

  • 220
  • 230
  • 240
  • 245
  • 260
  • 267
  • 280
  • 290
  • 300
  • 310
  • 320
  • 330
  • 340
  • 350

Dimensions are confirmed against your bike before production. If you do not know your disc size, our reverse engineering guide shows how to measure it.

Request a quote

Carbon Ceramic Brake Disc for MV Agusta F3 — Front

We reply within 12 hours on average.